Poly(vinylferrocenium) perchlorate–polyaniline composite film-coated electrode for amperometric determination of hydroquinone

Poly(vinylferrocenium) perchlorate–polyaniline (PVF⁺–PANI) composite film was synthesized electrochemically on Pt electrode in a methylene chloride solution containing a mixture of poly(vinylferrocene) (PVF) polymer and aniline monomer. PVF⁺ polymer in the composite film was used as an electron transfer mediator. The composite coating showed significant electrochemical activity towards hydroquinone (HQ) at pH 4, with high sensitivity and a wide linearity range. The interaction of HQ with PVF⁺ and PANI homopolymer films was investigated electrochemically and spectroscopically. HQ molecules are accumulated on the electrode surface due to trapping by both polymers in the composite film and then oxidized catalytically by PANI. The most significant contribution of PVF⁺ polymer is that it facilitates electron transfer in the composite film. The linear response range was found to be between 1.60 × 10⁻⁴ mM and 115 mM (R ² = 0.999) at 0.45 V vs saturated calomel electrode. The limit of detection (LOD) was 4.94 × 10⁻⁵ mM.     

Effect of Spontaneous and Carrier Noise on Mode-Locked Hybrid Soliton Pulse Source

Noise characteristics of mode-locked hybrid soliton pulse source (HSPS) where fiber Bragg grating is used as external cavity is presented. Model is based on time-domain solution of coupled-mode equations including spontaneous noise. Relative intensity noise (RIN) is calculated by using numerical solution of these equations. It is shown that inclusion of carrier density noise in the rate equations is necessary for the accurate analysis of noise in mode-locked lasers. It is also found that transform-limited pulses are not generated over a wide tuning range around the fundamental mode-locking frequency with spontaneous and carrier density noise sources if noise level is high. Therefore mode-locking range where transform limited pulses are obtained reduces.     

A theoretical study on the ground and excited state behaviors of TTBC related carbocyanine dyes

The effects of functional groups on the benzimidazole rings, length of the conjugated chain and alkyl groups bonded to the nitrogen atoms on the ground and excited state behaviors of the 1,1′,3,3′-tetraethyl-5,5′,6,6′-tetrachlorobenzimidazolocarbocyanine (TTBC or JC-1) have been analyzed via quantum chemical methods. DFT and TDDFT with B3LYP/6-31G(d,p) level of theory were used for the ground and excited state calculations, respectively. It has been found that TTBC has a very rigid geometry; no significant effect of functional groups has been predicted either as donor or acceptor on its optimum structure. However, the length of alkyl groups changes the structure of the molecule. It is possible to increase λ_max of TTBC based carbocyanine dye with NH₂, butyl/propyl and increasing polymethine chain length.     

Determination of rofecoxib,in the presence of its photodegradation product,in pharmaceutical preparations by micellar electrokinetic capillary chromatography

A simple and rapid micellar electrokinetic capillary chromatographic (MEKC) method for analysis of rofecoxib (ROF) and its photodegradation product (PDP) in pharmaceutical preparations has been developed and validated. Analyses were conducted in a fused silica capillary (72 cm effective length, 50 m i.d.) with a background electrolyte consisting of 25 mmol L^–1 borate buffer at pH 7.0 containing 15 mmol L^–1 sodium dodecyl sulfate (SDS) and 10% acetonitrile (ACN). The separation was performed by voltage-controlled system, applying 30 kV at 30 °C, detecting at 225 nm; injection was hydrodynamic at 50 mbar for 2 s. Nifedipine was used as internal standard (IS). Under the optimum conditions ROF, PDP, and IS were well separated with in 10 min. The method was validated with regard to linearity, limit of detection and quantitation, precision, accuracy, specificity, and robustness. The detection limit of the method was low, 0.8 g mL^–1, and the linearity range was wide, 2.5 to 125 g mL^–1. The method was highly efficient—5×10⁵ plates m^–1 for ROF. The method was applied to the tablet form of ROF-containing pharmaceutical preparations. The data were compared with those from the voltammetric method described in literature. No statistically significant difference was found.     

Production of acetone-butanol-ethanol from corn mash and molasses in batch fermentation

The production of solvents from corn mash and molasses in batch fermentation usingClostridium acetobutylicum P 262 was examined. The content of saccharose of beet molasses used in experiments is determined by using the gravimetric method (52.45% saccharose). The quantities of molasses that are used in the nutrient medium are calculated after doing the above determination. The samples of fermentation liquid are taken within a certain time, the determination of saccharose is done by using the same method, and all the saccharose is converted by the microorganism to organic end products. The quantitative and qualitative determination of acetone-butanol has been made by using gas chromatography. On the other hand, using the three isolation way, three different cultures are obtained, and with microscopic observations, the cultures obtained are of the C.acetobutylicum genus. According to the literature values, the concentration of maximum mixed solvent formed during fermentation is about 2%. This is seen in this experiment. There is only a slight difference from this value. This difference is caused by another organic product that is formed during fermentation.     

Simultaneous Determination of Rosiglitazone and Metformin in Pharmaceutical Preparations by LC

In the present study, a novel, fast and simple liquid chromatographic method was developed and validated for the simultaneous determination of rosiglitazone and metformin in pharmaceutical preparations. The separation was achieved on a phenyl column (250 × 4.6 mm i.d., 5 μm) using a mobile phase composed of acetonitrile:10.0 mM phosphate buffer pH 5.5 (70:30, v/v). The flow rate was 1 mL min⁻¹. UV detection was performed at 245 nm and verapamil was used as internal standard. The developed method was validated in terms of stability, specificity, sensitivity, linearity, accuracy, precision and robustness. The limit of quantification was 0.02 μg mL⁻¹ for both drugs. The method developed was successfully applied to the simultaneous determination of rosiglitazone and metformin in pharmaceutical preparations. The results were compared to two methods reported in the literature and no significant difference was found statistically.     

Synthesis,Configuration, and Antimicrobial Properties of Novel Substituted and Cyclized ‘2′,3″‐Thiazachalcones’

Nine new thiazachalcone‐based drugs, compounds 1 – 9 , were prepared and fully characterized. The configurations of the photochemical‐dimerization products 7 – 9 were rationalized by semi‐empirical calculations. Both the experimental data and the theoretical calculations showed that the δ‐truxinic acid type dimer is the most stable isomer of all. All compounds were tested for their antibacterial and antifungal activities. The N‐alkylated congeners 4 – 6 showed strong antimicrobial activities against various bacteria and a yeast‐like fungus. The MIC and MBC values were as low as 0.1 μg/ml. All the compounds were active against the Gram‐positive bacterium Staphylococcus aureus.     

Synthesis and spectroscopic properties of (N/O) mono- and dispirocyclotriphosphazene derivatives with benzyl pendant arms: study of biological activity

The Cl replacement reactions of hexachlorocyclotriphosphazene (trimer; N ₃ P ₃ Cl ₆ ) with sodium (N-benzyl)- aminopropanoxides (1 and 2) produced monospiro- (3 and 4), cis-, and trans-dispirocyclotriphosphazenes (13–16). The monospiro tetrakis-aminocyclotriphosphazenes (5–12) were obtained by the Cl substitutions of 3 and 4 with different secondary amines. The cis- (13 and 14) and trans-dispirophosphazenes (15 and 16) possessed 2 chiral P centers, and they were able to present meso and racemic forms, respectively. Moreover, the structures of compounds 5 and 14 were designated using X-ray data. The absolute configuration of compound 14 was found as SR in the solid state. Analytical and spectroscopic data of the phosphazenes were consistent with their suggested structures. Antimicrobial activities of the benzyl-pendant-armed cyclotriphosphazenes were scrutinized against G(+) and G(−) bacteria and yeast strains. The bacterium most affected by the synthesized compounds was Pseudomonas aeruginosa . Minimum inhibitory concentrations and minimal bacterial concentrations were in the range of 125–500 μM. Interactions between the phosphazenes (3–12 and 15) and plasmid DNA were studied with agarose gel electrophoresis. The phosphazene- DNA interaction studies of the cyclotriphosphazenes revealed that phosphazenes 3, 4, and 15 had a substantial effect on supercoiled DNA by cleavage of the double helix.     

Determination of glutathione disulfide levels in biological samples using thiol-disulfide exchanging agent, dithiothreitol

A reverse-phase HPLC method incorporating dithiothreitol (DTT) reduction for quantitative determination of oxidized glutathione (GSSG) in biological samples is described here. This method is based on our previous enzymatic reduction technique that uses N-1-(pyrenyl) maleimide (NPM) as a derivatizing agent. In our earlier method, glutathione disulfide (GSSG) was measured by first reducing it to GSH with glutathione reductase (GR) in the presence of NADPH. However, this is a very costly and time-consuming technique. The method described here employs a common and inexpensive thiol-disulfide exchanging agent, DTT, for reduction of GSSG to GSH, followed by derivatization with NPM. The calibration curves are linear over a concentration range of 25-1250 nm (r(2) > 0.995). The coefficients of variations for intra-run precision and inter-run precision range from 0.49 to 5.10% with an accuracy range of 1.78-6.15%. The percentage of relative recovery ranges from 97.3 to 103.2%. This new method provides a simple, efficient, and cost-effective way of determining glutathione disulfide levels with a 2.5 nm limit of detection per 5 microL injection volume.     

Microwave‐assisted synthesis of 1,3′‐diaza‐flavanone/flavone and their alkyl derivatives with antimicrobial activity

A simple environmentally friendly solid‐phase microwave‐assisted method was used to synthesis of the 1,3′‐diazaflavanone ( 2 ) and 1,3′‐diazaflavone ( 3 ) from the cyclization of 2′‐amino (E)‐3″‐azachalcone ( 1 ). Ten new N‐alkyl (C_5–12,14,15)‐substituted 1,3′‐diazaflavanonium bromides ( 2a–j ) were prepared from compound 2 with corresponding alkyl halides in acetonitrile under reflux. In addition, nine new N,N′‐dialkyl (C_5–12,14)‐substituted 1,3′‐diazaflavonium bromides ( 3a–i ) were also synthesized from compound 3 with corresponding alkyl halides using basic silica in acetonitrile. The antimicrobial activities of compounds 1–3 , 2a–j , and 3a–i were tested against Gram‐positive (G+) (Bacillus subtilis, Staphylococcus epidermidis, Staphylococcus aureus, and Enterococcus faecalis) and Gram‐negative (G?) (Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa, Proteus vulgaris, Salmonella typhimirium, Yersinia pseudotuberculosis, and Enterobacter cloaceae) microorganisms. They showed good antimicrobial activity against the Gram‐positive bacteria tested with the minimal inhibitory concentration values less than 7.8 μg/mL in most cases. The optimum length of the alkyl chain for better and broader activity is situated in the range of 9–12 carbon atoms in the series of compounds 2a–j and five to six carbon atoms in the series of compounds 3a–i . The nonalkylated compounds 1–3 were not effective, as were the ones alkylated with five or six C alkyl groups ( 2a and 2b ) and 8–13 C alkyl groups for N,N′‐dialkyl compounds ( 3c–3i ). The antimicrobial activity increased as the length of the alkyl substitution increased from 8 to 12 carbons in compounds 2a–j . However, antimicrobial activity decreased as the length of the alkyl substitution increased from 7 to 13 carbons in compounds 3c–i . J. Heterocyclic Chem., (2012)